TC0123b
page 5 of 28
3PC TONNEAU COVER WITH SPORTS BAR & REMOTE LOCKING
21/05/08
1.
NOTE
:
Two people are required to complete installation.
Thoroughly clean and dry the installation areas.
See Dia #1
.
Diagram #1
2. Clean the LED brake light area with the alcohol wipe provided and wipe away any residue with a dry, clean cloth. After removing the
protective lining, attach the black decal to the LED Brake light as shown, ensuring the brake light is completely covered.
See Dia #2
.
Diagram #2
IMPORTANT: If vehicle is fitted with an LED brake light at the top of the rear window,
proceed to Diagram #2. Otherwise, proceed to Diagram #3.
BLACK
DECAL
LED BRAKE LIGHT
3. Using a non-permanent marker, find and mark the centre point of the header rail using a tape measure. Position the drill template
on top of header rail, aligning the edge correctly with the rear window and the notch in the centre with the marked centre point on the
header rail as shown.
See Dia #3
.
IMPORTANT: Re-check the centre point of the header rail has been marked correctly.
Drill template MUST be centre.
Diagram #3
DRILL TEMPLATE
FIND AND MARK HEADER RAIL CENTRE POINT
1
2
2
CENTRE POINT
MARKED ON
HEADER RAIL
DRILL
TEMPLATE
NOTCH IN CENTRE
OF DRILL TEMPLATE
REAR WINDOW
