TC0123b
page 4 of 28
3PC TONNEAU COVER WITH SPORTS BAR & REMOTE LOCKING
21/05/08
WARNING!
When in the closed position, Tonneau Cover must be locked and tailgate must be closed! Failure to do so could result in unexpected opening of the
Tonneau Cover from sudden wind gusts, which could cause damage to the vehicle and/or your Tonneau Cover!
Warranty Terms
EGR warrants that the ABS Tonneau Cover will be free from defects in material and workmanship for a period of three (3) years from the retail date of
purchase. The gas struts are warranted for one (1) year from the retail date of purchase. This warranty only applies to the original purchaser and is
nontransferable. Warranty must be claimed with original sales receipt for proof of purchase.
Exclusions
This warranty does not cover failure due to neglect, improper installation including any modifications to installation hardware, operating the vehicle
with your EGR Tonneau Cover in the open position, alterations, addition of equipment, abuse, accident, corrosion, normal wear and tear, lack of
maintenance, and exposure to chemicals that are not safe for plastics.
Incidental or consequential damage or loss of contents due to use, neglect, lack of maintenance, misuse of EGR Tonneau Cover is sole responsibility
of the vehicle owner and operator. Paint wear to the vehicle bed can happen with any Tonneau Cover and is the sole responsibility of the vehicle
owner. Paint damage to your vehicle is not covered under this warranty.
Disclaimer
In the event that your EGR Tonneau Cover is found to be defective under the terms of this warranty, it is at the discretion of EGR to repair or replace
the defective part. Transportation costs and labour are not associated with this warranty claim.
Maintenance
Your EGR Tonneau Cover only requires periodic cleaning with mild car wash soap. Only use cleaners, waxes, or products that are labeled safe for use
on plastics. Avoid the use of any chemicals to clean your EGR Tonneau Cover unless labelled safe for plastics.
The gas struts are self lubricating and should only be cleaned occasionally with a damp cloth. Premature seal failure will result if solvents or lubricants
are used to clean struts. Gas struts must be orientated in open Tonneau position with the shaft end attached to the tub.
The locking mechanisms only require occasional lubrication with lithium grease. All installation hardware and fasteners must be checked every so
often for tightness.
Do not cycle remote key fob continuously or the actuator for operation of the remote locking system will burn out.
TONNEAU COVER - IMPORTANT:
• Do not stand/sit or rest heavy objects on Tonneau Cover.
• Humans or animals are not to be under the closed Tonneau Cover at any time.
• Securely lock Tonneau Cover before operating vehicle.
• Do not carry open volatile chemicals with Tonneau Cover installed.
• If contact with volatile chemicals occurs clean Tonneau Cover with mild detergent and water solution.
• Read instructions carefully before installation. It is strongly recommended that installation is conducted by an authorized dealer.
• This product must be installed exactly as specified in these instructions. Failure to do so may result in improper fit and/or retention.
• Recommend installation by 2 people.
SPORTS BAR - IMPORTANT:
Please take care when assembling and installing this product to protect the finish and your investment. To protect your investment, wax this product after
installing. Regular waxing is recommended. Do not use any type of polish or wax that contains abrasives that could damage the finish.
Finish Protection:
Our products have a high finish that must be maintained such as any other high finish product on the vehicle. Protect the finish with
a non-abrasive automotive wax. The use of soap, polish, or wax that contains abrasives is detrimental, as the compounds scratch the finish and open
it to corrosion. Use metal polishes - “Autosol” is recommended.
Disclaimer:
The buyer assumes all risk and liability whatsoever from the installation and use of our products. Our products are sold as decorative
accessories and should not be relied upon as protection for the vehicle or occupants in the event of a collision or rollover. The manufacturer assumes
no liability for injury, loss, incidental or consequential damages in the event of a collision or rollover.
PAINTING INSTRUCTIONS (IF UNPAINTED)
• Sand Tonneau Cover prior to painting recommend 500 grit using an orbital type sander.
• Prior to painting, clean all surfaces to be painted using clean water and a mild detergent, do not use lacquer thinner or any solvent based products.
Wipe completely dry.
• Best results will be achieved by wiping the areas to be painted with a tack rag just prior to painting.
• Select a top coat and clear paint that is suitable for ABS (Acrylonitrile-Butadiene-Styrene).
• Automotive paint systems, such as Acrylics or Two Packs, can be applied directly to the components. However, some paints may require a primer.
If recommendations on paint specification are not followed, cracking of the part or degradation to the material may result. In all paint systems,
aromatic hydrocarbons and alkalies are best avoided to reduce damage to the material properties.
• If using a paint system which requires baking, do not expose the product to temperatures above 70° C (155° F).
• Allow a minimum of 8 hours after baking before installation on the vehicle.