TC0123b
page 24 of 28
3PC TONNEAU COVER WITH SPORTS BAR & REMOTE LOCKING
21/05/08
58. Manually lock and unlock the Tonneau Cover using the key supplied (Tonneau Cover is supplied in the unlocked position). Check
operation of the central unlocking mechanism by pressing the lock and unlock on your vehicle’s key. Review operation through the
inspection cover. Test operation of lock mechanism by pressing Tonneau’s push button after you have pressed
lock
on the vehicle’s
key, and then again after you have pressed
unlock
on the vehicle’s key. Finally, replace the inspection cover.
See Dia #58.
Diagram #58
TONNEAU
LOCKED
TONNEAU
UNLOCKED
GENTLY
CLOSE
TONNEAU
LOOSEN
SCREW
OPEN
TONNEAU
COVER
57. Join the two 4-way connectors located at the front of the tub as shown. Push the terminals behind the bedliner after they are
attached.
See Dia #57.
Diagram #57
56. Loosen the screw found on the terminal housing on the driver’s side gas strut, until it can move up and down the strut freely. With
the tailgate open, gently close the Tonneau Cover. Inspect the driver’s side gas strut and ensure the terminal housing has come into
contact with the gas strut’s cylinder as shown. Finally, open the Tonneau Cover and tighten the screw on the terminal housing as
shown.
See Dia #56.
Diagram #56
1
2
4
3
5
ENSURE CONTACT
HAS BEEN MADE
GAS
STRUT
CYLINDER
TIGHTEN
SCREW
4-WAY MALE
CONNECTOR
(WIRING HARNESS)
4-WAY FEMALE
CONNECTOR
(TONNEAU COVER)