10. Loosely attach the Sports Bar top tube to the Sports Bar left hand and right hand leg using the M8x30mm black screw and M8 black
internal tooth washer as shown. Do not tighten yet.
See Dia #10
.
Diagram #10
9. Slide the rubber sleeves over the ends of the Sports Bar left hand leg and right hand leg and then slide the Sports Bar top tube in
as shown. Ensure that all holes are aligned with each other, and that the LED wiring is fed through the large hole in the bottom of the
Sports Bar right hand front leg.
See Dia #9
.
NOTE: Ensure the warning label is orientated correctly. If wording is upside-down
flip bar 180º.
Diagram #9
11. Note the protective lining on back of Sports Bar foot gaskets. Trial fit the gaskets to the Sports Bar to determine which foot they are
fitted to. Remove the lining before attaching in next step.
See Dia #11
.
Diagram #11
TOP TUBE
RUBBER
SLEEVE
LEFT HAND
LEG
RIGHT HAND
LEG
RUBBER
SLEEVE
LEG
LEG
RUBBER
SLEEVE
RUBBER
SLEEVE
TOP
TUBE
TOP
TUBE
RIGHT
HAND
FRONT
LEG
LED
WIRING
NO POWER
TOOLS
M8 INTERNAL
TOOTH WASHER
M8x30 BLACK SCREW
FOOT GASKET
RIGHT HAND FRONT
FOOT GASKET
RIGHT HAND REAR
FOOT GASKET
LEFT HAND FRONT
FOOT GASKET
LEFT HAND REAR
TC0123b
page 8 of 28
3PC TONNEAU COVER WITH SPORTS BAR & REMOTE LOCKING
21/05/08