TC0123b
page 26 of 28
3PC TONNEAU COVER WITH SPORTS BAR & REMOTE LOCKING
21/05/08
REMOVAL OF TONNEAU COVER
1. Open Tonneau Cover, pull the 4-way connectors out from behind the bedliner and disconnect them. Disconnect the wiring harness
from the terminals on the driver’s side gas strut. Detach gas struts by inserting a small screw driver and adjusting the spring clip on the
strut as shown.
See Dia #1. NOTE: Do not remove the spring clip. Only a small amount of levering is required to detach.
Diagram #1
2. Remove hinge pins and remove the Tonneau Cover as shown.
See Dia #2.
Diagram #2
BALL STRUT SCREW
GAS
STRUT
4
5
3
1
GAS STRUT
HINGE
PIN
RIGHT HAND SHOWN
2
3
RIGHT HAND SHOWN
1
HINGE
PIN
DRIVER’S SIDE ONLY
GAS STRUT
BOTTOM
GAS
STRUT
TOP
WIRING
HARNESS
2
4-WAY
CONNECTORS
UNDERSIDE OF
TONNEAU COVER
