Ecolab EcoAdd Скачать руководство пользователя страница 54

Страница: 54 / 204

6.5

Modification/upgrade

6.5.1

Modification - turning the pump head

To allow the pump to be adjusted to the site conditions, it is possible to turn the

control unit (operating unit/upper part of the pump).

DANGER!
Risk of electric shock

Pay attention to disconnect the power supply immediately and to secure

against accidental switch-on!

Fig. 19: Turning the pump head

Loosen the fastening screws on the control unit.

The screws (1) are not secured against falling out!

Ensure that the screws are not lost during disassembly and do not use

any screws other than those originally provided.

Lift the control unit approx. 5 cm upwards.

Two cables that pass control signals to the pump are located between the

pump control unit and the bottom part of the pump. When performing

the modification, ensure that you do not trap these cables between

the control unit and the upper part of the pump.

Turn the control unit in the desired direction and place it on the housing.

The blue pump housing contains a seal for the control unit. During

assembly, ensure that the seal is free of contamination to prevent leaks.

Tighten the fastening screws on the control unit (operating unit/upper part of the

pump).

The tightening torque for the fastening screws on the control unit is

approx. 1 Nm. To prevent damage to the thread, we recommend

tightening the screws by hand.

Assembly, installation, modification and upgrades

Rev. 2-05.2018

Содержание EcoAdd













































































































































































































Результаты поиска

Содержание EcoAdd

Отзывы:

Бренды по названию

Популярные бренды

Ecolab EcoAdd, Руководство по эксплуатации

Результаты поиска

Содержание EcoAdd

Отзывы:

Бренды по названию

Популярные бренды