manualshive.com logo in svg

Ecolab EcoAdd, Руководство по эксплуатации

Поделиться
Скачать
Ecolab EcoAdd Скачать руководство пользователя страница 161

10 

Service

Personnel:

n

Mechanic

n

Qualified electrician

n

Service personnel

CAUTION!
Info on authorised service personnel of Ms. Ecolab

A separate Service manual is available, which can be requested from the

manufacturer if you have the appropriate qualification or authorisation, or it can

be downloaded using the existing login at 

www.ecolab-engineering.com

 .

The consumables and spare parts belonging to the pump type can be identified

on the basis of the pump key.
The pump key (

Ä

 Chapter 13.3  ‘Pump key  ‘EcoAdd’ ’ on page 185) is

available on the type plate (

Ä

 Chapter 13.2  ‘Equipment marking / Type plate’

on page 184) of the pump and is also additionally displayed on the  ‘INFO’

screen (

Ä

 Chapter 7.2  ‘Start Screen’ on page 57) of the pump.

Before servicing is carried out, the pump-specific consumables and spare parts

() should be stocked up

Ä

 Chapter 12  ‘Wearing parts and spare parts’

on page 177.
For all queries to the manufacturer, it is important that the designation

and the pump type are quoted correctly. This is the only way of ensuring

flawless and fast processing.

DANGER!
Damage and injuries may occur if installation, maintenance or repair

work is carried out incorrectly.

Maintenance and repair work may only be performed by authorised and trained

specialist personnel in compliance with current local regulations.
The safety regulations and required protective clothing (PPE) must be

complied with when working with chemicals. Attention must be paid to the

information included on the product data sheet of the dosing medium used.

During or prior to maintenance and repair work:

– Use only original spare parts.
– Depressurise the pressure line.
– Disconnect the dosing medium supply and clean the system thoroughly.
– Unplug the mains plug or disconnect the pump from all power sources, and

secure against accidental re-activation!

NOTICE!
Damage caused by using incorrect tools!

Damage may occur as a result of using incorrect tools during assembly,

maintenance or troubleshooting. 

Only use the correct tools.

Service

161

Rev. 2-05.2018

Содержание EcoAdd













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды