manualshive.com logo in svg

Ecolab EcoAdd, Руководство по эксплуатации

Поделиться
Скачать
Ecolab EcoAdd Скачать руководство пользователя страница 122

7.13 

Internal storage

The pump is equipped with an

internal memory, which stores the log

data, operating data and the alarm

data. All this data can be

downloaded and saved with the

export function of the pump using a

suitable USB stick.

Since the memory on the pump is

limited, the memory status is

graphically displayed at the

operational level just before reaching

the memeory limit.

Fig. 79: Internal memory management of EcoAdd

The memory status is visible only when one of the three storage types is at least 75%

filled. Then at least one of the three fields is orange (pos. 1). After 95% of the storage

capacity, the colour of the corresponding segment changes to red (pos. 3).
Latest by then, the corresponding storage should be imported via USB stick and then

reset (deleted), so that no entries are lost. If the data is not saved in time, always the

oldest entries are overwritten. The display sequence is determined as follows (from left to

right): Log data memory (Pos. 1), operating data memory (Pos. 2), alarm data memory

(Pos.3).

Control / software

122

Rev. 2-05.2018

Содержание EcoAdd













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды