Ecolab EcoAdd, Руководство по эксплуатации

Страница: 152 / 204

9.8.1.2.2 [Operating Mode] [Pulse] - Quantity
Fig. 103: Operating Mode: Pulse
1. [Call up Main menu] :
Ä
Chapter 7.6 ‘Main menu’ on page 66
2. [Select Operating Mode] - [Pulse] .
3.
[Press the Next] button.
ð Screen change for setting: ‘Pulse interval’ .
4. Do NOT enter ANY pulse interval, or set the pulse interval to 0!
For this, set 0 in the place before the decimal point using the scrollbar.
Then select the field for entering the place after decimal point and set it likewise to 0
using the scrollbar.
5.
[ Press the Next] button.
ð Screen changes to the ‘Pulse memory’ query.
6. Select whether the ‘pulse memory’ is to be used.
ð If the ‘Pulse memory’ has been selected, a is set in the selection box.
7. Press the button.
ð
Settings are saved, and the screen returns to the [Operating Mode] .
8.
Press the button.
ð The screen switches back to the overview [main menu] .
9.
Press the button.
ð
The screen switches back to the [operating display] .
10. Press the displayed value (l/pulse) for the rate for approx. 3 seconds.
ð The configuration page for changing the unit (l/pulse) is displayed
11. Slightly tap the desired unit (l/pulse, ml/pulse, G/pulse) of the concentration setting
and select it.
12.
Press the button.
ð The screen switches back to the concentration setting.
13. If necessary, adjust the concentration value once again with the newly set unit.
14. Press the button.
ð
The screen switches back to the [operating display] .
Operation
152 Rev. 2-05.2018