Ecolab EcoAdd, Руководство по эксплуатации

Страница: 151 / 204

2. [Select Operating Mode] - [Select Pulse] .
3.
[Press the Next] button.
ð Screen change for setting: ‘Pulse interval’ .
4. Enter pulse interval (ml, l / pulse) of the flowmeter being used.
5. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
6. Set the decimal point with the scrollbar.
7. Press the Next button.
ð Screen changes to the ‘Pulse memory’ query.
8. Select whether the ‘pulse memory’ is to be used.
ð If the ‘Pulse memory’ has been selected, a is set in the selection box.
9.
Press the Next button.
ð The screen switches to the setting for the ‘Concentration’ .
10. Enter solution concentration (% / ppm) of the flowmeter being used.
11. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
12. Set the decimal point with the scrollbar.
13. Press the button.
ð
Settings are saved, and the screen returns to the [Operating Mode] .
14.
Press the button.
ð The screen switches back to the overview [main menu] .
15. Press the button.
ð
The screen switches back to the [operating display] .
16. Keep the displayed value (% / ppm) of the concentration pressed down for approx. 3
seconds.
ð
The configuration page for changing the unit (% / ppm) is displayed.
17. Slightly tap the desired unit (% / ppm) of the concentration setting and select the
required unit.
18.
Press the button.
ð The screen switches back to the concentration setting.
19. If necessary, adjust the concentration value once again with the newly set unit.
20. Press the button.
ð The screen switches back to the [operating display] and displays the newly set
unit.
Operation
151 Rev. 2-05.2018