manualshive.com logo in svg

Ecolab EcoAdd, Руководство по эксплуатации

Поделиться
Скачать
Ecolab EcoAdd Скачать руководство пользователя страница 12

1.8 

Packaging

The individual packages are packaged according to the expected transport conditions.

Only environment-friendly materials were used for the packaging. The packaging is

designed to protect the individual components up to assembly against shipping damage,

corrosion and other damage.

Therefore, do not destroy the packaging and only remove it just before assembly.

ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!

Packaging materials are valuable raw materials and can, in many cases, be

used again or be usefully processed and recycled.

Incorrect disposal of packaging materials can be a threat to the

environment.

– Observe the locally applicable disposal regulations!
– Environment-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.

Symbols on the packaging

Symbol

Name

Description

Top

The package must be principally transported, handled and stored in such a

way that the arrow is always indicated upwards.

Rolling, folding, severe tilting or tumbling or other such handling must be

avoided. ISO 7000, No 0623

Fragile

The symbol has to be fixed in case of easily breakable goods.

Goods marked as such have to be handled with care and must in no way

be toppled or fastened. ISO 7000, No 0621

Keep this product

dry

Goods marked as such have to be protected from high humidity, and thus

must be stored covered.

If it is not possible to store particularly heavy or bulky packages in halls or

shed, they have to be carefully covered with tarpaulin. ISO 7000, No 0626

Protect against

cold

Goods marked as such must be protected against excessive cold. These

packages should not be stored outdoors.

Stack limiting

Maximum number of identical packages that can be stacked, where n

stands for the number of permissible packages. ISO 7000, No 2403

Electrostatic

sensitive device

Contact with packages marked as such must be avoided at low levels of

relative humidity, especially if insulating footwear is being worn or the

ground/floor is nonconductive.

Low levels of relative humidity must in particular be expected on hot, dry

summer days and very cold winter days.

General remarks

12

Rev. 2-05.2018

Содержание EcoAdd













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды