Ecolab 417102214, Руководство пользователя

Страница: 103 / 182

417102214_EDPL_V60.docx 103 Rev. 1.12.11
10.5.4.1 Calibration data table
The pump capacity in l/h is allocated to the pump’s electronics on the basis of the calibration
values entered in the table.
Example: specified value of 3.67 l results in a pump capacity of 220 l/h.
NOTE
These values relate to the metering medium, i.e. water, at 20°C.
ED
PL
V6
0
Pump Pump capacity [l/h] Pump calibration value [l]
Fig. 10.56
220 3,67
480 8,0
670 11,17
10.6 Operating data
Open main menu as descripted at chapter 10.1 and go to operating data by using the

key.
Acknowledge your choice with the Start/Stop key. If you push the

and

keys at once
(Function: „Menü Exit“) you get back to operating mode.
The following operating data is recorded and displayed under this menu item:
•
Hours in operation, Litres, Number of pulses
NOTE
The values in "Operating data" are updated anew every time the "Operating data" menu
option is called up. This means that if the operating data is called up while the pump is
running, the incrementing of the values is not displayed.
10.6.1 Overview
Fig. 10.57
see chapter 10.6.2
see chapter 10.6.3
see chapter 10.6.4