ADS-B - ADJUSTMENT/TEST
AMM-34-50-21-071-801
1.
General
A. This task gives procedures to do the adjustment/test of the ADS-B.
NOTE: ADS-B test is only required, if the ADS-B function is enabled.
•
There are two testing setup methods, the preferred method is with the use of a
transponder antenna coupler to limit emissions that may interfere with Air Traffic
Control operations and the second method which uses the IFR-6000 antennas.
2.
Equipment and Materials
A. Special Tools and Equipment
Name and Part Number
Transponder Test Set (Aeroflex, IFR6000) or equivalent
UC-584 Universal Transponder Antenna Coupler | Dual Antenna Kit (Viavi 112349)[1]
Weight-on-Wheels (WOW) Box (EAI, 87-117390-1001) or AMC 2.4.01 (or higher).
Ground Power Unit (GPU). AllStar 450 or AllStar G.S.E. or Hobart GPU-400 or Hobart GPU-
600 or Bycan PS-28100
[1] For test with UC-584 antenna coupler.
3.
Job Set-Up with UC-584 Antenna Couplers
SUBTASK AMM-34-50-21-071-921-001-A
A. Make aircraft safe for maintenance. Refer to
AMM-20-00-01-051-801 – Make Safe For
B. If on jacks, refer to
AMM-07-10-00-051-801 – Jacking - Maintenance Practices
and
AMM-08-20-00-051-801 – Leveling.
C. Connect external power. Refer to
AMM-24-40-00-051-801 – External Power -
Do not turn on START BATT and SYS BATT switches until
prompted.
D. Prepare Anti-ice system for maintenance. Refer to
AMM-20-00-03-051-801 – Prepare
Anti-Ice Systems For Maintenance
.
E. Connect Antenna Coupler UC-584S to Aircraft upper Transponder Antenna as follows:
(as applicable)
NOTE: For Transponder–1 Adjustment/Test
EA500 Aircraft Maintenance Manual — 06-117751
Temporary Revision No. 34-21
EFFECTIVITY: ALL POST MB 500-31-016
34-50-21
Page 501
Sep 30/20
© 2020 Eclipse Aerospace, Inc.