KGL Operating Manual – UA 412 S
2019-01-14
/
78 122
8.3 Remote control via the terminal
Further details for the operation of a system centre, store computer or operator terminal can be found
in their operating manuals.
For the remote control of a controller, it makes no difference whether this is done with a system centre
, a
(A)
store computer or with an operator terminal
as the user interfaces on the terminals are almost identical and
(B)
the same functions are available. For details about remote control, see
Calling controller menu using remote
.
The system centre only emulates the "hardware front" of its "store computer" predecessor or of the operator
terminal by software on its touchscreen which is demonstrated by the following comparison between the
terminals of the CI 4x00 and CI 3x00 / AL 300:
(1)CI 4x00: "Alarms and messages" button in the main menu for display of whether alarms are pending.
Alarms are acknowledged in the "alarm list". CI 3x00 / AL 300: red LED signal lamps to indicate whether
alarms are pending.
(2)CI 4x00: "Horn" button in the main menu for muting of the buzzer and for reset of the AUX relay. CI 3x00 /
AL 300: button for muting of the buzzer, for reset of the AUX relay* and for acknowledgement of alarms.
(3) Display (4 lines x 20 characters) for display of the menu of the controller.
(4) ESC
button (5) Cursor buttons
(6)
button for, e.g. toggle upper case / lower case during text input.
MODE
(7) Alphanumeric keyboard
(8)
button (
)
ENTER
Only CI 3x00 / AL 300:
(9) On/Off button for, e.g. lighting
(10) Green LED signal lamp for status indicator whether the button is activated (then green) or deactivated.
