KGL Operating Manual – UA 412 S
2019-01-14
/
80 122
In contrast to the system centre, store computer or operator terminal, the menu of the controller is
displayed directly on the terminal device.
Menus
A menu can contain up to ten menu items (0 .. 9; 0 for menu item 10). After the selection of a menu item using
the cursor buttons (
) and (
) and by tapping the
button (
) or by tapping the buttons 0..9),
ENTER
other submenus or operating screens are displayed.
Selection of the menu items
Each line of this selection list in the display has a digit between 1 and 9 as well as 0 for menu item 10 with the
associated name of the corresponding menu item. The various menu items can be selected directly by tapping
the digit buttons 0 .. 9.
If a menu provides more than 3 submenus, the cursor buttons (
) and (
) can be used for paging in the
menu to display the remaining menu items.
A menu item does not have to be displayed to select it using a numeric button.
Operating screens
An operating screen contains values for output and/or values for input. More values for output and/or input can
be available than can be shown on the display. In this case, these values can be displayed by scrolling. If an
operating screen contains several pages, these can be paged through.
If it is possible to scroll or page in a menu or an operating screen, this is indicated by direction arrows
on the right in the display.
Scrolling
Using the cursor buttons (
) and (
),
scrolling can be line by line, e.g. for selection of a variable in a line from a list of predefined variables.
scrolling can be block by block so that values can be shown that cannot be displayed with the others
due to the limited capacity of the display.
Paging
If an operating screen contains multiple pages (e.g. the alarm list), these can be paged through using the
cursor buttons (
) and (
). In menus that provide more than 3 submenus, these can be paged through
using the cursor buttons (
) and (
) to display the remaining menu items.
It is possible to scroll within the operating screens as follows using the following button combinations:
MODE + 9 three lines up or
MODE + 3 three lines down.
Input of values and text
