EBS Ink-Jet Systems 1500 Series Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 111

EBS Ink-Jet Systems 1500 Series Скачать руководство пользователя страница 70

EBS-1500

Series Printers User's Manual

Paragraph 4 - Operating the Printer

EBS

Ink Jet Systems

68

20060920#3.1

4.4.6. Replacing

ink

bottle

General information

Every bottle of ink is equipped with
a transponder (an electronic circuit where
bottle identification data are stored and can
be accessed with no need for wire contact
or additional power supply). The
information is scanned from the
transponder with a built-in

I

nk

M

onitoring

S

ystem (the abbreviation

IMS

shall be used

hereinafter) that uses an aerial situated in
the Ink System.

Fig. 4.4.6.1

shows the

position of the aerial.

NOTE:

Fig. 4.4.6.1

shows the position of the

ink monitoring system if the printing
system works with a

compressor

system. The position of the transponder
seat (and the aerial of the Ink
Monitoring System) for the ink system
with an ink pump is described in the
document entitled

Ink System with an

Ink Pump.

bottle of ink

ink bottle

container

Ink Monitoring System

(IMS) and aerial

Fig. 4.4.6.1.

The

I

nk

M

onitoring

S

ystem ensures that:

1)

The bottle is identified explicitly.

2)

The printer system is checked continuously for appropriate ink.

IMS

prevents the

application of the ink that is different from the one that was used in the printer’s
ink system originally. Type of the consumable and its service life are checked.

3)

Ink distribution and monitoring are improved as the information is coded and
validated electronically in every transponder.

Each bottle can be only used in one printer for which it was accepted by

IMS

.

Approved bottles cannot be moved to other printers and other bottles cannot be
replenished with the fluid from the approved bottle. The approved bottle should
remain in the printer until the fluid is consumed.

If

IMS

messages concerning the ink bottle are displayed in the main window on the

terminal display, they are preceded by the indication “

INK:

”, whereas if they are

displayed in the printer status window, they are preceded by the first letter of the
indication, that is “

I:

”. For example:

!

«
...
68
69
70
71
72
...
»

Содержание 1500 Series
















































































































Отзывы:

Нет отзывов