EBS Ink-Jet Systems 1500 Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 111

EBS Ink-Jet Systems 1500 Series Скачать руководство пользователя страница 15

EBS

Ink Jet Systems

EBS-1500

Series Printers User's Manual

Paragraph 2 - Installing the Printer

20060920#3.1

13

Electromagnetic

head.

Complete head holder.
Interface

cable.

Photo detector - optimeter.
Ink

system.

Ink system with an ink pump.
Ink Monitoring System (

IMS

) with cable.

  Bottle of ink.
  Shaft-encoder – conveyor’s speed indicator.
  Object holder, the so called gun (used for making overprints manually).
  Additional external alarm indicator.
  Additional external alarm device (with conveyor control and stop indication).
Code

switch.

Starting kit for RS-232 (or RS-485)

serial interface.

Movable platform with a cable for making overprints manually.
Bottle of wash-up.
Wash-up

spray.

NOTE:

•

The above list shall not be considered a specification of accessories (to be) delivered

together with a printer or printing system purchased by the user.

•

The list of accessories may vary from country to country.

2.3.2. Preparatory

Steps

In order to prepare a new or transported printer to operation, you should perform the

following activities:

1.

Remove all parts of the system out of their packing.

2.

Place the controller in a room that is free from vibration, shocks, dust, smoke, soil,
aggressive or inflammable vapours and gases.

NOTE:

The room shall meet the following requirements:

Environmental conditions:

operating temperature from +5

°

C to +40

°

C,

relative humidity up to 90% without condensation.

Mechanical requirements:

max. vibration 1g at max. frequency 10Hz,
max. shocks 1g over max. 2ms.

3.

Secure the print head holder in a convenient position.

NOTE:

If the conveyor vibration is too strong, the head holder should be fastened to
a stable rack or on a wall that are not part of the conveyor system.

4.

Install the print head in a holder. Make sure, however, that the front planes of the head
and objects to be labelled are parallel. The electromagnetic print-head can work in any
position in space.

!

!

!

«
...
13
14
15
16
17
...
»

Содержание 1500 Series
















































































































Отзывы:

Нет отзывов