EBS Ink-Jet Systems 1500 Series, Руководство пользователя, Страница: 34 / 111

EBS-1500
Series Printers User's Manual
Paragraph 4 - Operating the Printer
EBS
Ink Jet Systems
32
20060920#3.1
When the
§
key is pressed in the word processor, parameter menu is displayed for your
subfile. The parameters have the following meaning:
PARAMETER DESCRIPTION AND SETTINGS DEFAULT
Type :
Subfile type. Any parameters shown below are typical for
a
Graphics subfile.
Graphic , Barcode , Ins. text , sub Text
Text
Height :
The maximum height (number of pixels) of a graphic block
equals the maximum height
Hmax of a printable vertical row.
1 , 2 , 3 , .... , Hmax
Hmax
Length :
Expected length (number of pixels) of a graphic block.
1 , 2 , 3 , .... , 32767
As set
Front dis :
Blank space (number of vertical rows) before a graphic block.
0 , 1 , 2 , 3 , .... , 5000
0
Back dist :
Blank space (number of vertical rows) after a graphic block.
0 , 1 , 2 , 3 , .... , 5000
0
NOTE:
•
Subfile parameters can be changed at any time during the edition of a Graphic (by
pressing the § key).
•
After the edition of a graphic block has been completed, empty vertical rows on the
right of the last non-blank row are deleted automatically. Therefore the block length
changes and differs from the original setting.
By pressing the
«V
keys you will move to the word processor , where every pixel
can be inserted/erased. The image is magnified four times to make individual pixels more
visible on the display. The graphic cursor coordinates are shown in the status window on the
terminal display. A reference point is for them the top left corner of the graphic block.
X: horizontal coordinate Y: vertical coordinate.
GRAPHIC PROCESSOR – A description of function keys
ª To show in inversion (off/on) a point indicated by the cursor.
¨
To switch between the editor pen modes: UP / SET / CLEAR .
UP lift up the pen,
SET set the pen in the > write < mode,
CLEAR set the pen in the > erase < mode.
The pen status is displayed in the terminal status window.
I
To invert (enable/disable) every element of a graphic subfile
irrespective of the pen state defined with the
¨
key.
¢¡£¤
To move the cursor right, left, up or down according to the pen
mode. If the cursor is moved right, beyond the length limit, new
vertical rows are inserted and the subfile length is modified.
Y ¢¡£¤
To move the cursor by 8 dots in the direction indicated by the
arrow.
¥
To insert an empty vertical row and move the following rows by
one row to the right.
!