EBS Ink-Jet Systems 1500 Series, Руководство пользователя, Страница: 57 / 111

EBS
Ink Jet Systems
EBS-1500
Series Printers User's Manual
Paragraph 4 - Operating the Printer
20060920#3.1
55
Vertical Direction
1 Vert. direct.
2 UP , DOWN
3 UP
4 YES
The parameter defines two modes of printing in the vertical
direction: normal or "upside down". It is useful when the object
labelled is reversed.
" NORM. " DIRECTION OF PRINTING
PRINT HEAD
Fig. 4.4.3.4.1.
Initial Distance
1 Space
2
0,0 ; 0,1 ; ... ; 6553,5
mm
3 2,0 mm
4 YES
The parameter defines the distance given in millimetres, from
the point where the photo detector has been activated to the
point where printing of a text file should start. During printing
the distance is measured off properly provided that the settings
of the
Cnv spd m/min parameter (for Generator = GEN ) and
the Enc const p/m parameter (for Generator = SHAFT )
correspond to real measurements taken at the print place. It
enables a user to adjust the print position in relation to the edge
of the object to be labelled.
Number of Repetitions
1 Text rpt.
2
1, 2, 3, ... , 65534,
CONTIN.
3 1
4 YES
The parameter defines how many times the overprint is to be
made after the photo detector has been activated, from the
point where the overprint begins. It is used to print a subfile on
an object many times. For continuous objects such as cables,
hoses or tubes you can set continual printing. Distance
between consecutive overprints is defined with the
Rpt.dist.
parameter - see below.