EBS Ink-Jet Systems 1500 Series, Руководство пользователя, Страница: 39 / 111

EBS
Ink Jet Systems
EBS-1500
Series Printers User's Manual
Paragraph 4 - Operating the Printer
20060920#3.1
37
NOTE: If no text files are defined in the library, the command is ignored.
4.4.1.8. Linking File Names with Parameter-block Names
Certain print parameters need to be set during the printing (see section
4.4.3.4 Print
Parameters
). When you change the text to be printed (e.g. as the line of products to be
labelled changes), the parameters need to be adjusted accordingly. Therefore it would be
advisable to develop a tool that might enable you to do the following:
´
Store print parameters for a given text file,
´
Link the parameters stored with the text file to be printed,
´
Set all parameters for the text file automatically just before the printing, after the
print command has been chosen.
A solution to meet the above requirements is offered by EBS printers. Every text file (that is
stored in the library) can be linked with a parameter block and such a pair can be stored in the
file library. To do this, follow the procedure below:
In the main MENU select the TEXT SERVICE item and then the LINK PARAMETERS item.
The display shows the text file library from which you should select a text file name (see also
section
4.4.1.1 Introduction to Text Files
). Then the parameter block library is displayed,
from which you should select a parameter block name.
Now the text file name is linked with the corresponding parameter-block name and the
relevant information remains in the printer memory even if the power supply is switched off.
For how to detach the parameter block from the a selected text file see paragraph
4.4.1.7 Accessing the File Library
.
4.4.1.9. Using the Password
You can secure access to the following commands that are called
protected commands
further on:
´
all commands in the menu branch TEXT SERVICE ,
´
all commands in the menu branch PARAMETERS SERVICE ,
´
commands in the menu branch PRINTING , such as:
•
SAVE CURRENT PARAM. ,
•
SET SHIFT COUNTER ,
•
GLOBAL COUNTER ,
•
SET GLOBAL COUNTER .
The objective is to protect text files, parameter blocks and the object counter against
accidental or deliberate access by unauthorised persons.
This security feature is implemented by defining a password and enabling the password. Any
access to the secured MENU commands is possible only after the password has been typed
in. When the right password has been typed, the commands previously unavailable will
become available until the password function is enabled again or the printer is turned off.
When the password is defined, the password function is enabled automatically after the unit
has been switch on.
Defining a User Password
In the main MENU select the TEXT SERVICE item and then the
CREATE/CHANGE PASS item.