Eaton IQ 250, Руководство пользователя и инструкция по установке

Страница: 88 / 142

8-24
IB02601006E
www.eaton.com
Chapter 8:
Programming the IQ 250/260 IQ 250/260 Meter
Poll Power and Energy

Click
Real-Time Poll>Revenue, Energy and Demand Readings>Power and Energy
. You will see the screen
shown below.
This screen displays the power and energy for Total Power and all three phases .
1. Click the
tabs
at the top of the screen to select the view you want:
•
Total
•
Phase A
•
Phase B
•
Phase C
2. Click Print to print the readings.
3. Click OK to close the screen.
Poll Accumulators

Click Real-Time Poll>Revenue, Energy and Demand Readings>
Accumulations . You will see the screen shown on the right.
This screen displays the current readings for the Input and
Output Accumulators of any installed Relay Ouput/Digital Input
and Pulse Output/Digital Input Option cards.
The readings are shown after the configured Compression and
Units/Count have been applied. For information on setting
Compression and Units/Counts for Accumulators, refer to
the instructions for configuring Relay Output/Digital Input
and Pulse Output/Digital Input Cards, earlier in this chapter.
Click OK to close the screen.