2
XCHARGEIN MOBILITY INSTALLATION MANUAL
MN191005EN April 2021 www.eaton.com
00 Title
1.1 Field of applications
This installation manual is intended for professional installers. It describes how to securely install and commission the
Eaton xChargeIn Mobility AC EV charger.
Table 1. Eaton xChargeIn Mobility overview
xChargeIn Mobility
Power input
AC EV charger
Input voltage
1 x 230 V 50 Hz - 1 phase
3 x 400 V 50 Hz - 3 phase
Input current
1 x 16 A (3.7 kW) - 1 phase
1 x 32 A (7.4 kW) - 1 phase
3 x 16 A (11 kW) - 3 phase
3 x 32 A (22 kW) - 3 phase
Power output
Output power
3.7 kW to 22 kW
Output type
Type 1 cable up to 7.4 kW (Mode 3)
Type 2 cable up to 22 kW (Mode 3)
Options
Cable
Type 1 or Type 2 or both
Floor-mounted
Column for single or double mounting
Network interface
4G
Access control
RFID
Warranty
Warranty
5 years
1.2 Symbols used in this manual
Imminent dangers causing serious injuries. Danger of death.
An electric shock can be fatal.
Avoid touching internal or external parts normally live while the system is powered on.
Read the instructions. These instructions are intended for professional installers. A professional installer must
be an expert in the field and is therefore responsible for commissioning the system in accordance with the
manufacturer’s instructions and local legislation.
Hazardous behaviors that could cause serious injuries.
Hazardous behaviors that could cause death.
Behaviors that could cause minor injuries to people or minor damages to things.
The notes preceded by this symbol relate to technical issues and ease of operation.
The EU Directive on Waste Electrical and Electronic Equipment (WEEE).
1.2.1 Related icons