36
XCHARGEIN MOBILITY INSTALLATION MANUAL
MN191005EN April 2021 www.eaton.com
00 Title
8.4 Uninstall
8.5 Station updates
8.6 Disposal
Before starting any maintenance operations, ensure the system has been switched off, and that the AC-line
external main switch has been set to off.
Wait at least 10 minutes before removing the xChargeIn Mobility.
Please use suitable PPE or wait for the equipment to cool down before accessing it.
1. Disconnect any load if present.
2. Open the housing by removing the fixing screws.
3. Disconnect the AC GRID connectors.
4. Disconnect the communication wires and external controls where present.
5. Dismount the floor-mounted column if present.
6. The product can now be removed for disposal or repair.
It is mandatory to install and maintain units with the latest system updates to enable new features and bug
fixes, or the guarantee conditions may be voided.
For units that are online, this must be done via the appropriate software platform. Please refer to the
appropriate software manual, available on www.eaton.com, for further details. For units that are offline
please contact your Eaton service representative.
When xChargeIn Mobility reaches the end of its service life, the end user should contact a professional installer for
disposal instructions.
The EU Directive on Waste Electrical and Electronic Equipment (WEEE) (Directive 2012/19/EU) establishes
common rules on the management of electrical and electronic equipment and minimizes its impact – from
design until disposal – on the environment. As a manufacturer of electrical and electronic equipment, Eaton
actively supports the requirements of the WEEE Directive.
In compliance with the EU standard EN 50419 for marking of electrical and electronic equipment, we include
the crossed-out wheeled bin symbol on our products. This symbol alerts users that these products should
be recycled in accordance with local environmental regulations and not discarded with household waste.
When end users recycle WEEE they are helping to ensure that they are neither incinerated nor sent to
landfill, minimizing the potential negative impact on human health and the environment.
Any device that is no longer needed must therefore be returned to the distributor or disposed of via an
authorized collection and recycling center in the area. Eaton encourages all its customers and end users to
make responsible decisions when disposing of products.
Eaton is not responsible for the logistical transportation from the end user’s house to the recycling center.
To uninstall the unit:
