12
XCHARGEIN MOBILITY INSTALLATION MANUAL
MN191005EN April 2021 www.eaton.com
00 Title
4.4 Lifting, transportation and unloading instructions
4.5 Unpacking
Transportation and handling
Transportation of the equipment, especially on the road, must be carried out in such a way as to protect the
system components (especially electronic components) from major impacts, humidity, vibrations, etc.
During handling, sudden or fast movements which could cause the system to sway dangerously must be
avoided.
Lifting
Eaton packs and protects each component by using devices that ease its transportation and handling. These
operations must be carried out by qualified and authorized installers who specialize in loading and unloading
components.
The ropes and vehicles used for lifting must be able to withstand the weight of the equipment.
Do not lift multiple units or parts of the equipment at the same time, unless otherwise stated.
The xChargeIn Mobility is not equipped with specific lifting tools.
Remember that the packaging elements (cardboard, cellophane, staples, adhesive tape, straps, etc.) can
cut and/or injure, if not handled with care. They must be removed with appropriate tools and must not be
handled by non-responsible people (i.e. children).
The packaging components must be removed and disposed of in accordance with the local regulations and
laws of the country of installation.
Check the integrity of the packaging before opening.
Open the packaging and remove the xChargeIn Mobility carefully to avoid damaging the external casing or
the internal electronic parts.
Before commissioning, ensure that the external casing of the xChargeIn Mobility is in good condition and
free from damage sustained during transportation.
Do not underestimate the weight of the xChargeIn Mobility – check the technical specifications.
Do not move or stop the hanging load above people or things.
Do not let it drop with too much force.
