eao 09 Series Скачать руководство пользователя страница 79

Страница: 79 / 80

www.eao.com

The button illumination of the keypad can be used for function and fault

indication of the application e.g. by flashing or colour change.

15.

Cleaning

Cleaning with water and commercially available soft cloths is possible. Do not use solvents.

Please ensure that the distance between the nozzle and the product is not less than 0.5 m

when using a high pressure water jet.

Caution!

Cleaning with a high-pressure water jet is not permitted with a distance

nozzle to product less than 0.5m.

Damage to the keypad

Electrical shock due to leakage of the keypad

16.

Optional accessories

Symbol inserts with customer-specific symbols or alternatively according to ISO 7000 can be

procured. Symbol inserts without symbols (blanks) can also be procured.
A insert tool for changing the symbol inserts are available (article number: 09-0A00.0001).

17.

Liability for quality defects

The general function of the keypad has been tested at the factory before delivery. However, if

errors occur despite the careful quality control, they must be reported immediately to EAO or

the dealer.
The liability for quality defects is 12 months for the delivered products. Within this period of

time, faulty parts, except wear parts, will be repaired or replaced free of charge if the keypad

is returned to EAO, free of charge.
Damages caused by improper use or the use of force are excluded from the liability for quality

defects. Damages caused by repairs or modifications to the keypad are also excluded. EAO is

exclusively responsible for repairs to the keypad.
Further claims cannot be asserted. Claims arising from the purchase contract remain

unaffected.
EAO is not liable for consequential damages. The right to design changes, in particular in the

sense of product improvement, is reserved.

Содержание 09 Series

















































































Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды

eao 09 Series, Руководство по эксплуатации

Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды