eao 09 Series Скачать руководство пользователя страница 63

Страница: 63 / 80

www.eao.com

10.9.2.4 Changing the temporal patterns for the symbol LED Illumination

There are 4 predefined temporal patterns available for the symbol LEDs.

Value Setting name

Setting description

0x00

Steady

LED always on

0x01

Flash slow

LED flashing on and off with default value times

0x02

Flash fast

LED flashing on and off with default value times faster than 0x01

0x03

Pulsate

LEDs slowly turning off and on with default value times

There is an object described in the K-Matrix that stores the information for the temporal pattern

setting for the symbol LEDs. The object in question is number 0x2204. The subindex 1 through

6 correspond with the buttons 1 to 6.
Example message for setting the temporal pattern for button 2 to Setting 1 (Flash slow):

11-Bit

Identifier

DLC

Data field

Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7

0x60B

0x2F

0x04

0x22

0x02

0x01

0x00

10.9.2.5 Changing the global brightness for the symbol LED Illumination

The global brightness setting is a setting that is dimming the LEDs above all other settings. So

to get realistic values in the aforementioned settings the global brightness needs to be set to

100%. The value for the brightness can be found in the tab “value definition” in the K-Matrix.

The setting of global brightness always affects all Symbol LEDs at once.
There is an object described in the K-Matrix that stores the information for the global brightness

setting for the symbol LEDs. The object in question is number 0x2206.
Example message for setting the global brightness to 20%:

11-Bit

Identifier

DLC

Data field

Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7

0x60B

0x2F

0x06

0x22

0x00

0x32

0x00

10.9.3

Halo-Ring Illumination

The Halo-Rings of the keypad are illuminated with 4 RGB LEDs for each button. In the following

the corresponding objects will be described to turn them on and how to use all the functions

the keypad has to offer.
All changes done in the object will be reset after voltage reset if not stored in non-volatile

memory according to 10.7.

10.9.3.1 Activating Halo Ring Illumination

As there are 4 LEDs per button it is important to know that there are always 2 steps needed to

activate the halo LEDs. In one step it is set which of the 4 LEDs are supposed to be turned on.

And in the second step the halo for the button in question is activated.

Содержание 09 Series

















































































Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды

eao 09 Series, Руководство по эксплуатации

Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды