eao 09 Series Скачать руководство пользователя страница 13

Страница: 13 / 80

www.eao.com

Proper environment

See Technical specification.

Note

If possible, avoid abrupt changes in the operating temperature of the

keypad, cable and connector.

Damage to the keypad, cable or connector

Caution!

Do not operate the keypad in:

Potentially explosive atmospheres

Applications where the keypad, cable and connector are completely or

partly submerged for extended periods of time

Situations in which the keypad, cable and connector are subjected to

harsh external shocks and impacts

Do not use for remaining in final customer installations due to

validation not completed

Risk of injury

Damage to the keypad, cable or connector

The design of the keyboard (keys can still be pressed) means that keys are

protected from freezing as long as the keys remain accessible and can be

pressed. This means that the keyboard can also be used in snow and ice.

General description

Series 09 Rugged Keypads offer high reliability: The modules are designed for an intelligent

control with CAN bus integration. The robust, modular design with protection degrees of up to

IP6K7 and the possibility of customer-specific adaptations and the arrangement of symbol

inserts predestine the devices for harsh use in heavy-duty and special vehicles. The modules

are as well designed for ECE certification.
High reliability and functional safety are indispensable for the control of safety-relevant

applications in vehicles and machines – whether in construction machinery, construction

vehicles, agricultural machinery or in various types of special and commercial vehicles. Harsh

environmental conditions and low back panel depth require a robust and compact product

design. In addition, the control and signalling devices must be precisely configurable both

mechanically and electronically for the respective application. The high-quality Rugged Keypad

meets these requirements with a cutting-edge system integration.

Содержание 09 Series

















































































Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды

eao 09 Series, Руководство по эксплуатации

Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды