eao 09 Series Скачать руководство пользователя страница 14

Страница: 14 / 80

www.eao.com

Typical applications

Special vehicles such as fire engines, road sweepers, cleaning vehicles, dustcarts, snow

clearing vehicles and snow groomers. Heavy-duty vehicles such as construction and

agricultural vehicles

Advantages

Individual 4-segment and RGB Halo Ring Illumination

Intelligent HMIs with CAN bus integration

Robust, ergonomic and innovative design with a protection degree of up to IP6K7

(mounted state front: IP6K7; back: IP20 without plugged connector). Protection degree

for assembled situation in responsibility of customer application.

Interchangeable ISO 7000 symbols or customer-specific symbols

Robust and innovative design

The design of the Rugged Keypads is characterised by a robust and innovative construction.

The control and signalling devices, which are protected up to IP6K7, function reliably at an

operating temperature of – 40 °C to + 85 °C. The low back panel depth and robust clip-in or

screw-in mounting allow a flexible and easy installation, either vertically or horizontally. The

high-quality devices also offer an excellent haptic and, thanks to the bright RGB LED halo and

LED symbol illumination, are clearly visible in daylight and at night. An attractive and

configurable 4-segment halo button illumination is integrated as standard.
The customisable illumination provides the operator with excellent visual feedback and is

combined with a unique, contemporary design.

Durability

The series 09 CAN modules are produced in our automotive competence centre located in

Germany. This allows us to apply our many years of comprehensive experience as an original

equipment manufacturer (OEM) in the automotive industry to the heavy duty and special

vehicles markets. At the same time, this offers EAO customers high quality, durable products

and services. The development and production process is aligned and executed according to

automotive standards, including qualified suppliers. This requirement ensures EAO high

quality products and solutions.

CAN bus integration

Thanks to the CAN bus integration, the devices are integrated intelligently and easily into a

CAN system – as standard with a Deutsch DT series connector. The device controls its function

according to the CAN command.

Designed for E1 applications and CAN bus integration

The robust control units with flexible illumination are ideally suited for use in heavy duty and

special vehicle applications.

Содержание 09 Series

















































































Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды

eao 09 Series, Руководство по эксплуатации

Результаты поиска

Содержание 09 Series

Отзывы:

Похожие инструкции для 09 Series

Бренды по названию

Популярные бренды