Eagle ICA-D212-725, Инструкция по эксплуатации

Страница: 657 / 729

ICA-D212-725 (96)
Page 46 of 90
CHAPTER 96 – ELECTRICAL SYSTEM (96-00-00)

COPYRIGHT

2007 BY DART AEROSPACE LTD.

THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED OR COMMUNICATED TO ANY
OTHER PERSON WITHOUT WRITTEN PERMISSION FROM DART AEROSPACE LTD.
Revision:
4
Date: 11.06.01
96.5.4 Engine Oil Pressure Indicator
NOTE
S/Ns 30576, 30687, 30931,
30817 and 30599 use an AC
powered Engine Oil Pressure
indicating system. For all S/Ns
except 30576, 30687, 30931,
30817 and 30599 refer to Section
96.6 for details of the DC
powered indicating systems.
The engine oil pressure indicator system is a
remote type indicating system. AC power is
routed through a circuit breaker to the pressure
indicator and pressure transmitter. Any pressure
sensed by the pressure transmitter will be
indicated on the pressure indicator.
96.5.5 Operational Check – Engine Oil
Pressure Indicator
SPECIAL TEST EQUIPMENT
TYPE OR MODEL NOMENCLATURE
Barfield Model Pressure Tester 0-
2311F-S or Equivalent 150 psi. (0-1034 KPa)
96.5.5.1
On helicopter perform operational
check as follows:
96.5.5.1.1
Disconnect pressure line from oil
pressure transmitter on engine.
96.5.5.1.2 Attach pressure tester to the
transmitter and apply 100 psig (689.5 kPa) to
transmitter. Do not exceed 110 psig (758.45
kPa).
96.5.5.1.3 Apply electrical power to the
helicopter electrical system. Verify ENGINE OIL
pressure indicator reads 100

10 psi.
96.5.5.1.4
Turn electrical power off.
96.5.5.1.5 Reduce pressure and remove
pressure tester from pressure transmitter.
Connect pressure line to engine oil pressure
transmitter.
96.5.6 Transmission Oil Pressure
Indicator
NOTE
S/Ns 30576, 30687, 30931,
30817 and 30599 use an AC
powered Transmission Oil
Pressure indicating system. For
all S/Ns except 30576, 30687,
30931, 30817 and 30599 refer to
Section 96.6 for details of the DC
powered indicating systems.
The transmission oil pressure indicator system is
a remote type indicating system. AC power is
routed through a circuit breaker to the pressure
indicator and pressure transmitter. Any pressure
sensed by the pressure transmitter will be
indicated on the pressure indicator.
96.5.7 Operational Check –
Transmission Oil Pressure Indicator
SPECIAL TEST EQUIPMENT
TYPE OR MODEL NOMENCLATURE
Barfield Model Pressure Tester 0-
2311F-S or Equivalent 150 psi. (0-1034 KPa)
96.5.7.1
On helicopter perform operational
check as follows:
96.5.7.1.1 Disconnect pressure line from
transmission oil pressure transmitter.
96.5.7.1.2 Attach pressure tester to the
transmitter and apply 100 psig (689.5 KPa)
pressure to transmitter. Do not exceed 110 psig
(758.45 KPa).
96.5.7.1.3 Apply electrical power to the
helicopter electrical system. Verify
TRANSMISSION OIL pressure indicator reads
100

10 psi.
96.5.7.1.4
Turn electrical power off.
96.5.7.1.5 Reduce pressure and remove
pressure tester from pressure transmitter.