Eagle ICA-D212-725, Инструкция по эксплуатации

Страница: 225 / 729

ICA-D212-725 (29)
Page 28 of 50
CHAPTER 29 – HYDRAULIC SYSTEM (29-00-00)

COPYRIGHT

2007 BY DART AEROSPACE LTD.

THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED OR COMMUNICATED TO ANY
OTHER PERSON WITHOUT WRITTEN PERMISSION FROM DART AEROSPACE LTD.
Revision:
6
Date: 13.08.26
29.3.3.6 Hydraulic Filter Assemblies (P/N
212-076-006-007) - Installation
MATERIALS REQUIRED
NUMBER NOMENCLATURE
C-002 or C-072 Hydraulic Fluid
C-405 Lockwire
NOTE
Refer to Chapter 12 for information on usage and
mixing of hydraulic fluid (C-002) and hydraulic fluid
(C-072).
NOTE
Lubricate all packings, retainers and threads with
hydraulic fluid (C-002) or hydraulic fluid (C-072)
before installation.
CAUTION
DO NOT USE NON-CLEANABLE P/N 205-076-
034-003 AND CLEANABLE P/N 205-076-034-007
FILTER ELEMENTS IN THE SAME SYSTEM.
DO NOT MIX.
29.3.3.6.1 Lubricate packing (2, Figure 29-4) with
hydraulic fluid (C-002) or hydraulic fluid (C-072).
29.3.3.6.2 Install packing (2) and retainer (3) in
valve body (1).
29.3.3.6.3 Lubricate packing (4) with clean
hydraulic fluid (C-002) or hydraulic fluid (C-072).
29.3.3.6.4 Install packing (4) in filter element (5).
29.3.3.6.5 Install
filter element (5) into filter bowl
(6).
29.3.3.6.6 Fill filter bowl (6) half full with clean
hydraulic fluid (C-002) or hydraulic fluid (C-072).
29.3.3.6.7 Lubricate
threads of filter bowl (6) with
clean hydraulic fluid (C-002) or hydraulic fluid (C-
072).
29.3.3.6.8 Install filter bowl (6) in valve body (1).
CAUTION
DO NOT EXCESSIVELY TIGHTEN THE
LOCKWIRE ON FILTER BODY AND FILTER
BOWL. DAMAGE TO THE LOCKWIRE HOLES
CAN OCCUR.
29.3.3.6.9
Carefully secure filter bowl (6) to
valve body (1) with lockwire (C-405).
29.3.3.6.10 Install the forward pylon fairing
(Chapter 52)
29.3.3.6.11 During
initial run-up, check for
leaks.
29.3.3.7 Hydraulic Filter Assemblies (P/N
212-076-006-105) - Installation
MATERIALS REQUIRED
NUMBER NOMENCLATURE
C-002 or C-072 Hydraulic Fluid
NOTE
Refer to Chapter 12 for information on usage
and mixing of hydraulic fluid (C-002) and
hydraulic fluid (C-072).
CAUTION
DO NOT USE NON-CLEANABLE P/N 205-076-
034-003 AND CLEANABLE P/N 205-076-034-
007 FILTER ELEMENTS IN THE SAME
SYSTEM. DO NOT MIX.
29.3.3.7.1 Lubricate packing (15, Figure 29-4)
with hydraulic fluid (C-002) or hydraulic fluid (C-
072).
29.3.3.7.2 Install
packing (15) and retainer (14)
in valve body (8).
29.3.3.7.3 Lubricate packing (13) with clean
hydraulic fluid (C-002) or hydraulic fluid (C-072).
29.3.3.7.4 Install packing (13) in filter element
(12).