background image

2

EFL Slick 3D 480

SAFETY WARNINGS AND PRECAUTIONS

Read and follow all instructions and safety precautions 
before use. Improper use can result in fire, serious injury 
and damage to property.

Components

Use only with compatible components. Should any 
compatibility questions exist, please refer to the product 
instructions, component instructions or contact the 
appropriate Horizon Hobby office.

Flight

Fly only in open areas to ensure safety. It is 
recommended flying be done at radio control flying 
fields. Consult local ordinances before choosing a flying 
location.

Propeller

Keep loose items that can become entangled in 
the propeller away from the prop. This includes 
loose clothing or other objects such as pencils and 
screwdrivers. Keep your hands away from the propeller 
as injury can occur.

Batteries

Always follow the manufacturer’s instructions when using 
and disposing of any batteries. Mishandling of Li-Po 
batteries can result in fire causing serious injury and 
damage.

Small Parts

This kit includes small parts and should not be left 
unattended near children as choking and serious injury 
could result.

SAFE OPERATING RECOMMENDATIONS

•  Inspect your model before every flight to ensure it is 

airworthy.

•  Be aware of any other radio frequency user who may 

present an interference problem.

•  Always be courteous and respectful of other users in 

your selected flight area.

•  Choose an area clear of obstacles and large enough to 

safely accomodate your flying activity.

•  Make sure this area is clear of friends and spectators 

prior to launching your aircraft.

•  Be aware of other activities in the vicinity of your flight 

path that could cause potential conflict.

•  Carefully plan your flight path prior to launch.

•  Abide by any and all established AMA National Model 

Aircraft Safety Code.

REGARDING MOTOR AND BATTERY 

SELECTION

This model has been tested using the components 
listed in the Power Systems section of this manual. 
Using components that exceed the output of the listed 
components may place excessive loads on the airframe. 
This could result in the failure of the airframe in high-
speed or high-load situations.

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon 
Hobby, LLC. For up-to-date product literature, visit horizonhobby. com and click on the support tab for this product.

Meaning of Special Language

The following terms are used throughout the product literature to indicate various levels of potential harm when 
operating this product:

NOTICE

: Procedures, which if not properly followed, create a possibility of physical property damage AND a little 

or no possibility of injury.

CAUTION

: Procedures, which if not properly followed, create the probability of physical property damage AND a 

possibility of serious injury.

WARNING

: Procedures, which if not properly followed, create the probability of property damage, collateral 

damage, and serious injury OR create a high probability of superficial injury.

 

WARNING

: Read the ENTIRE instruction manual to become familiar with the features of the product 

before operating. Failure to operate the product correctly can result in damage to the product, personal 
property and cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some 
basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury 
or damage to the product or other property. This product is not intended for use by children without direct adult 
supervision. Do not use with incompatible components or alter this product in any way outside of the instructions 
provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is 
essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in 
order to operate correctly and avoid damage or serious injury.

Age Recommendation: Not for children under 14 years. This is not a toy.

USING THE MANUAL

This manual is divided into sections to help make assembly easier to understand. Boxes (

) have been placed next 

to each step. These help keep track of steps that have been completed.

Содержание SLICK 3D 480

















































Отзывы: