12
13
Center of Gravity
Once the battery has been properly installed and secured, you will need to check the helicopter’s center of gravity .
With the canopy installed, lift the helicopter by the flybar with the flybar positioned perpendicular to the tail boom .
Slide the battery support and battery forward or rearward as required to achieve a slightly nose down or perfectly
level helicopter position. You should always check the CG of your Blade CP Pro 2 before flying, especially if you
are switching between different sizes and types of battery packs .
Support by Flybar
Level or Slightly
Downward Angle
Transmitter Control Identification
Note:
Each time before you fly you should ALWAYS turn the transmitter on before connecting the flight battery to
the 5-in-1 unit . After each flight, be sure that you always disconnect the flight battery from the 5-in-1 unit before
powering the transmitter off .
Throttle Trim Buttons
Aileron Trim Buttons
Elevator Trim Buttons
Rudder Trim Buttons
Elevator Trim Buttons
Aileron Trim Buttons
Throttle Trim Buttons
Rudder Trim Buttons
Rudder/Throttle
Functions
Rudder/Elevator
Functions
Aileron/Elevator
Functions
Aileron/Throttle
Functions
Mode 1
Mode 2
Содержание Blade CP Pro 2
Страница 40: ...78 79 ...