24
25
Once you’ve confirmed the proper dip switch positions and servo connections, all controls should be functioning
properly . However, if you continue to encounter any problems with your Blade CP Pro 2 responding properly to the
transmitter, do not fly . Call the Horizon Support Team at 1-877-504-0233 .
If you’ve confirmed proper control operation of your Blade CP Pro 2, unplug the flight battery and reconnect the
main and tail motors to the 2-in-1 unit, taking care to connect them to the proper leads using the markings on the
label for reference .
2-in-1 Control Unit Description, Arming and Motor Control Test
The unique 2-in-1 Control Unit installed on your Blade CP Pro 2 is a lightweight combination of main motor and tail
motor electronic speed controls, and main motor and tail motor proportional mixer . The 2-in-1 unit is also equipped
with a proportional tail rotor mix trimmer pot and status LED .
The following checklist contains the steps you must follow to ensure proper arming and operation of the 2-in-1 unit,
as well as proper motor response:
q
Each time before you fly you must ALWAYS turn the transmitter on before connecting the flight battery to the
2-in-1 unit . Never connect the flight battery to the 2-in-1 unit before powering the transmitter on first .
After each flight, be sure that you always disconnect the flight battery from the 2-in-1 unit before powering the
transmitter off .
q
Both the throttle stick and throttle trim MUST be in the lowest possible position in order for the 2-in-1 unit to
arm . The Flight Mode (F MODE) switch must also be in the normal (0) Flight Mode position with the switch
toggled toward the back of the transmitter for the unit to arm .
If this is the first test flight, or a test flight following repairs, you will also want to center the rudder, aileron and
elevator trims .
Proportional Pot
Status LED
Throttle Trim Buttons
Aileron Trim Buttons
Elevator Trim Buttons
Rudder Trim Buttons
Elevator Trim Buttons
Aileron Trim Buttons
Throttle Trim Buttons
Rudder Trim Buttons
Rudder/Elevator
Functions
Aileron/Elevator
Functions
Set Throttle
Trim and
Throttle Stick
at Lowest
Position
Mode 1
Mode 2
Set Throttle
Trim and
Throttle Stick
at Lowest
Position
Rudder/Throttle
Functions
Aileron/Throttle
Functions
Содержание Blade CP Pro 2
Страница 40: ...78 79 ...