background image

1070

For Boys And Girls 

Ages 5 And Up

57

LIGHTED

CONSTRUCTION SET INCLUDES:

• 35 Laser Pegs

®

• 225 Construction parts
• 3D Lite Board

®

• Instruction Manual

Requires 3 AA Batteries

Batteries NOT 

Included

Batteries NOT 

Included

This manual is copyright and cannot be reproduced or used online without Laser 

Pegs®Ventures LLC permission. Copyright 2012 © All Rights Reserved US Patent 

#7,731,558  Additional Global & Multiple Patents Pending. Laser Pegs®Ventures LLC. 

8304 Consumer Ct Sarasota FL. 34240. Contact: [email protected] 

Laser Peg® Parts List

Each Laser Peg® is color coded on the circuit board inside 

each shape. There is No LED In The 90 Degree Peg.

Construction Parts List

www.LaserPegs.com

Color 

Code

Connecting Pegs

Press button to turn on/off

Push button to cycle through 3 different light settings.

Peg Holes

AC Adapter 

Connection

Requires (3AA) Batteries

Requires (3AA) Batteries

Remove all batteries from Laser Pegs® 

3D lite Board® power base before using 

5 volt AC adapter.

SQUARE 

PEG

45° PEG

90° PEG

WHEEL PEG

Stackable

STRAIGHT

T-PEG

STRAIGHT

HALF-O 

PEG

Y PEG

Any creation you can build

There is No LED In The 90 Degree Peg

SQUARE

M-M PEG

STRAIGHT

M-M PEG

AC Adapter

INPUT is on side of 

3D Lite Board®.

Battery Compartment

Power Button

3 light settings.

Press power button to 

change light setting.

Hinge

Pull outward 

to open.

Place batteries in 

the correct position 

when using.

Tote Box

Designed for storage 

of Laser Pegs® parts.

Peg Holes

Peg Holes

Connecting  an AC Adapter

Plug AC Adapter plug into the side of the 3D Lite Board®.

Connect Laser Pegs® to 3D Lite Board®

NEVER place AC Adapter 

Plug

 

into top Peg Holes

Use Phillips head 

screwdriver.

3D Lite Board®

Please read manual before you begin! Failure to 

follow this manual’s instructions may result in 

damage to the 3D Lite Board®, AC Adapter and/

or Laser Pegs®. Not adhering to these directions 

will void the manufacturer’s warranty.

Packing has to be kept since it contains 

important information.

To construct with Laser Pegs®, slide two pieces together to form a 

connection. Slide each piece on and off smoothly. To build away from the 

Triangle Power Base, use the peg cord in one of the top three peg holes to 

illuminate your model! The 90° pegs are essential to construction but they 

DO NOT ILLUMINATE.

WARNING! Each Laser Peg® draws current from the batteries. Therefore, 

the more pegs you use, the quicker you will deplete your battery power! 

As the power weakens, the current will slowly fail and some Laser Pegs® 

will illuminate (typically the reds and yellows) and some won’t. When the 

Laser Pegs® dim the Laser Pegs® are not broken, they just need stronger 

batteries or an AC Adapter.

 You have 3 simple options...

1. Use a 5 volt AC Adapter –available from www.LaserPegs.com

2. Change the batteries. 

3. Use high quality batteries. They will last a little longer, but they will 

    still deplete rapidly the more laser pegs you connect!

Laser Pegs

®

 link that 

allows you to connect to 

other construction kits.

Power button

All additional model instructions can 

be downloaded at www.LaserPegs.com

MODEL INSTRUCTIONS

Laser Pegs

®

 Stackable

*To avoid short-circuits, keep metal objects 

and other un-authorized materials from 

obstructing the peg holes.

The AC adapter used with the power base are to be regularly examined for 

damage to the cord, plug, enclosure and other parts, and in the event of such 

damage, they must not be used until the damage has been repaired.

When Using Batteries

®

x4

x4

x6

x6

x6

x4

x2

x16

x8

x4

x8

x8

x12

x16

x6

x6

x1

x8

x8

x8

x8

x6

x20

x8

x6

x6

x6

x16

x8

x2

x2

x2

x4

x4

x8

x3

x1

x1

x1

x7

Compatible with other construction kits

          

WARNING:

CHOKING HAZARD

-

Small parts. 

Not for children under 3 yrs.

Do not submerge in water.

Construction Compatible

EN71, RoHS COMPLIANT

This product complies to 

all safety requirements 

of ASTM F 963

1.  Remove screws.

2.  Place three AA batteries in the correct position - as displayed inside the        

      3D Lite Board®.

3.  Push RED button to turn on!

4.  Do not mix old and new batteries.

5.  Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel- 

     

      cadmium)batteries!

6.  Exhausted batteries are to be removed from the power base.

7.  Never connect more than 200 Laser Pegs®

8.  Non-rechargeable batteries are not to be recharged.

9.  Rechargeable batteries are only to be charged under adult supervision.

10. Rechargeable batteries are to be removed from the toy before being        

       charged.

11. Batteries are to be inserted with the correct polarity.

12. The supply terminals are not to be short-circuited.

Never connect more than 200 

Laser Pegs®  when using a 5 volt 

(2000mA) AC Adapter.

Model

Difficulty 

Level

A

DEER

1

STEP

DEER — A slender grazing animal 

with branched antlers that are 

typically worn by males.

Reviews: