Fisher-Price 77770 Owner'S Manual With Assembly Instructions Download

Page: 1 / 32

Please read this manual and save it with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver, Hammer, Pliers

and Safety Scissors (tools not included).

Use only with a Power Wheels

12 Volt Lead-Acid Rechargeable Battery and Power Wheels

12 Volt Charger with Type “12V” Connector (included).

“CD Player” requires three “AA” (LR6) alkaline batteries (not included) for operation.

JEEP and the Jeep grille design are registered trademarks of DaimlerChrysler

Corporation and are used under license. ©DaimlerChrysler Corporation.

Fisher-Price, Power Wheels by Fisher-Price, BARBIE, Cruisin’ Tunes, Power Lock

and Power Stick are U.S. trademarks of Mattel Inc.

Owner's Manual

with Assembly Instructions

For Model 77770

www.powerwheels.com

Product features may vary from the picture above.

Summary of Contents for 77770

































Search results

Summary of Contents for 77770

Reviews:

Related manuals for 77770

Brands by name

Popular brands

Fisher-Price 77770, Owner'S Manual With Assembly Instructions

Search results

Summary of Contents for 77770

Reviews:

Related manuals for 77770

Brands by name

Popular brands