Dynapac CA270, Инструкция по эксплуатации

Страница: 53 / 99

Miscellaneous
ICA270-IN2EN1.pdf 2012-11-05
Miscellaneous
Lifting
1 2
3
4
Fig. Articulation in the locked position
1. Locking arm
2. Locking pin
3. Locking stud
4. Locking lug
Locking the articulation
Articulation must be locked to prevent inadvertent
turning before lifting the roller. Articulation must be locked to prevent inadvertent
turning before lifting the roller.
Turn the steering wheel to the straight ahead position.
Push in the emergency/parking brake knob.
Pull out the lowermost locking pin (2), which has a a
wire attached. Pull up the locking dowel (3) which also
has a wire attached.
Fold out the locking arm (1) and secure it to the upper
locking lug (4) on steering joint.
Fit the locking stub (3) in the holes through the locking
arm (1) and locking lug (4) and secure the stud in
position with the locking pin (2).
1
Weight: refer to the hoisting plate on the
roller
1
Fig. Roller prepared for lifting
1. Hoisting plate
Lifting the roller
The machine’s gross weight is specified on the
hoisting plate (1). Refer also to the Technical
specifications. The machine’s gross weight is specified on the
hoisting plate (1). Refer also to the Technical
specifications.
Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment. Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment.
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured. Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
45