7) Lift the black metal bar off and put aside, until finished cleaning.
Figure 5. Black bar lifted off the cutter.
8) Gently and very slightly, pull up on the visible wires (gray, black, brown, orange, &
red) that are connecting the cutter mechanism to the the machine, until it lifts up.
Then slowly wiggle the cutter until it comes loose and allows you to take it out of the
gray casing/cover
of the cutter mechanism.
Figure 6. Cutter disassembled.
51
5) Lift the whole casing of the cutter mechanism straight up and then towards you,
to detach the cutter mechanism from the 2 hooks that hold it in place.
Figure 3. Cutter mechanism is dismantled from machine. Red circles indicates the
hooks in step 5. White circles point out the screws in step 6.
6) Take out the 2 visible screws on the inside of the cutter mechanism, that are now
exposed.
*
Be careful, as there are 2 separate washers with each of the inside
screws.
Figure 4. Screws and washers from the inside of the cutter.
50
Содержание 4 TTP
Страница 1: ...DuraLabel 4 TTP User s Guide ...
