4)
Thread the Label Media under the Ribbon Mechanism and through the Printed
Label Opening
(#4, pg. 14)
and leave a little excess Media out the other side.
5)
Adjust the Adjustable Label Guides
(Fig. 7, #4, pg. 19)
, to hold the Label Media in
place.
*TIP: If there is not enough room to thread the Label Media under the Ribbon
Mechanism, set the Label Media on the lid, in the back of the machine. This will
allow more room to guide Label Media under the Ribbon Mechanism.
21
Figure 11. Label Media resting on the cover to allow more room during loading.
Loading of Label Media
*
Please view our supply loading video online at www.DuraLabel.com
1)
With the lid open and the front of the machine is facing forward, open the
Ribbon Mechanism
(#2, pg. 14)
by pulling the Printer Release Lever
(Fig. 7, #1, pg.
19)
forward, if not already opened.
2)
Load the Label Media
(Fig. 7, #3, pg. 19)
on the Label Supply Roll Spindle
(#7,
pg. 14)
and center the Label Media using the measuring units on the spindle and
hold it in place by adjusting the Fixing Tabs
(#9, pg. 14)
.
Figure 9. Label Supply Spindle with 2 Fixing Tabs
3)
With Label Media facing forward and extending over the top of the roll, place the
Label Supply Roll Spindle back in the Label Roll Mount
(Fig. 8, #2, pg. 19)
spaces.
Figure 10. Correct direction
of Label Media
20
Содержание 4 TTP
Страница 1: ...DuraLabel 4 TTP User s Guide ...
