DuraLabel 4 TTP, Руководство пользователя

Страница: 26 / 31

Extensive Cleaning of the Cutter
How to Disassemble the Cutter
It’s recommended to extensively clean the cutter after every 20 rolls of vinyl.
* Please take note of how things are taken apart for easy assembly.
1) While machine is OFF and unplugged, turn the machine upside down on its’ back.
Figure 1. Underside of machine.
2) Unscrew and take out the 2 visible screws on the underside of the machine,
which are closest to the cutter mechanism and put them aside.
3) Turn the machine right side up and open the cover.
4) Pull the Printer Carriage Release Lever towards you, to release the Ribbon
Mechanism.
Figure 2. Inside of machine.
49
Cleaning the Cutter
1) With the front of the machine facing forward, turn the machine OFF and unplug it
for safety.
2) Take a cleaning swab in between your thumb and fore finger and squeeze it until
it snaps. This will release alcohol to the tip of the swab.
3) Clean as far back as your swab will reach in the cutter and remove all glue and
vinyl that has built up through the use of the machine.
Figure 2. Swab cleaning the Cutter
Cleaning swab is the ONLY foreign object that can be inserted in the cutter.
Figure 3. Closeup of cutter in gray casing
48