DriSteem GTS LX Series Скачать руководство пользователя страница 58

Страница: 58 / 88

GTS HUMIDIFIER LX SERIES INSTALLATION, OPERATION, AND MAINTENANCE MANUAL

START-UP CHECKLIST

After the system is installed and connected to gas, electrical, water supplies,
controls, steam dispersion, and drain check the following items:

Verify that the GTS humidifier, controls, piping, electrical connections, steam

supply, and dispersion unit(s) are installed according to the following:
• Installation instructions in this manual
•

Vapor-logic Installation and Operation Manual

(shipped with the

humidifier)

- Installation section
- Installation checklist

•  Ladder style wiring diagram (shipped inside unit)
•  External connections wiring diagram (shipped inside unit)
•  Gas connection instructions in this manual
•  Mounting instructions in this manual
•  All governing codes

Piping (gas)
• Verify that the gas type supplied to the humidifier matches the unit

nameplate label.

• Verify that all field and humidifier gas piping has been tested for leaks.

(Soap and water are not recommended near gas valves.)

Piping (steam, drain, supply water)

—Verify that all piping connections have

been completed as recommended and that water pressure is available.

Electrical

—Verify that all wiring connections have been made in accordance

with all governing codes and the GTS wiring diagrams.

Controls

—Verify that all control wiring has been completed as specified and

required for correct and safe operation of the GTS humidifier. Refer to the

Vapor-logic Installation and Operation Manual.

Verify that the humidifier tank is securely installed and level before filling

with water (see the operating weights in Table 11-1.

Verify that the humidifier tank is level front to back and side to side after it is

full of water.

Start-up

The

Vapor-logic Installation and Operation

Manual

is a comprehensive operation manual.

Refer to it for information regarding the

following features:

• Display setup and menu information

• Control input signals and functions

• Drain, flush, and skim features

• Safety features

• Alert screens and fault messages

The manual was shipped with your humidifier.

Additional copies can be viewed, printed, or

ordered on our website: www.dristeem.com

OPERATION

WARNING

Startup

Only qualified electrical and gas
personnel should perform the start-up
procedure.

Содержание GTS LX Series

























































































Результаты поиска

Содержание GTS LX Series

Отзывы:

Похожие инструкции для GTS LX Series

Бренды по названию

Популярные бренды

DriSteem GTS LX Series, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание GTS LX Series

Отзывы:

Похожие инструкции для GTS LX Series

Бренды по названию

Популярные бренды