DriSteem GTS LX Series Скачать руководство пользователя страница 88

Страница: 88 / 88

Form No. GTS-LX-IOM-EN-0819

Part No. 890000-261 REV B

TWO-YEAR LIMITED WARRANTY

DRI-STEEM Corporation (“DriSteem”) warrants to the original user that its products will be free from

defects in materials and workmanship for a period of two (2) years after installation or twenty-

seven (27) months from the date DriSteem ships such product, whichever date is the earlier.

If any DriSteem product is found to be defective in material or workmanship during the applicable

warranty period, DriSteem’s entire liability, and the purchaser’s sole and exclusive remedy, shall

be the repair or replacement of the defective product, or the refund of the purchase price, at

DriSteem’s election. DriSteem shall not be liable for any costs or expenses, whether direct or

indirect, associated with the installation, removal or reinstallation of any defective product. The

Limited Warranty does not include cylinder replacement for electrode steam humidifiers or media

replacement for Wetted Media Systems.

DriSteem’s Limited Warranty shall not be effective or actionable unless there is compliance with

all installation and operating instructions furnished by DriSteem, or if the products have been

modified or altered without the written consent of DriSteem, or if such products have been subject

to accident, misuse, mishandling, tampering, negligence or improper maintenance. Any warranty

claim must be submitted to DriSteem in writing within the stated warranty period. Defective

parts may be required to be returned to DriSteem. Excluded from the Limited Warranty are all

consumable and wear and tear items such as cylinders, membranes, filters, or media replacements.

These items are subject to usual wear and tear during usage.

DriSteem’s Limited Warranty is made in lieu of, and DriSteem disclaims all other warranties,

whether express or implied, including but not limited to any IMPLIED WARRANTY OF

MERCHANTABILITY, ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, any

implied warranty arising out of a course of dealing or of performance, custom or usage of trade.

DriSteem SHALL NOT, UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, LOSS OF PROFITS, REVENUE OR BUSINESS) OR DAMAGE OR INJURY TO PERSONS OR

PROPERTY IN ANY WAY RELATED TO THE MANUFACTURE OR THE USE OF ITS PRODUCTS. The

exclusion applies regardless of whether such damages are sought based on breach of warranty,

breach of contract, negligence, strict liability in tort, or any other legal theory, even if DriSteem has

notice of the possibility of such damages.

By purchasing DriSteem’s products, the purchaser agrees to the terms and conditions of this Limited

Warranty.

EXTENDED WARRANTY

The original user may extend the term of the DriSteem Limited Warranty for a limited number of

months past the initial applicable warranty period and term provided in the first paragraph of this

Limited Warranty. All the terms and conditions of the Limited Warranty during the initial applicable

warranty period and term shall apply during any extended term. An extended warranty term of

an additional twelve (12) months or twenty four (24) months of coverage may be purchased. The

extended warranty term may be purchased until eighteen (18) months after the product is shipped,

after which time no extended warranties are available. When a DriSteem humidifier is purchased

with a DriSteem RO system, an extended twenty-four (24) month coverage is included.

Any extension of the Limited Warranty under this program must be in writing, signed by DriSteem,

and paid for in full by the purchaser.

DRI-STEEM Corporation

a subsidiary of Research Products Corporation

DriSteem U.S. operations are ISO 9001:2015

certified

U.S. Headquarters:

14949 Technology Drive

Eden Prairie, MN 55344

800-328-4447 or 952-949-2415

952-229-3200 (fax)

European office:

Grote Hellekensstraat 54 b

B-3520 Zonhoven

Belgium

+3211823595

E-mail: [email protected]

Continuous product improvement is a policy of

DriSteem; therefore, product features and

specifications are subject to change without

notice.

DriSteem, Area-type, Drane-kooler, DriCalc,

Rapid-sorb, Ultra-sorb, and Vapor-logic are

registered trademarks of Research Products

Corporation and are filed for trademark

registration in Canada and the European

community.

Product and corporate names used in this

document may be trademarks or registered

trademarks. They are used for explanation only

without intent to infringe.

Patents pending.

Expect quality from the industry leader

Since 1965, DriSteem has led the industry with

innovative methods for humidifying and cooling

air with precise control. Our focus on ease of

ownership is evident in the design of the GTS

humidifier, which features cleanable, stainless

steel construction. DriSteem also leads the

industry with a Two-year Limited Warranty and

optional extended warranty.

For more information

www.dristeem.com

[email protected]

For the most recent product information

visit our website: www.dristeem.com

WARRANTY

Содержание GTS LX Series

























































































Результаты поиска

Содержание GTS LX Series

Отзывы:

Похожие инструкции для GTS LX Series

Бренды по названию

Популярные бренды

DriSteem GTS LX Series, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание GTS LX Series

Отзывы:

Похожие инструкции для GTS LX Series

Бренды по названию

Популярные бренды