Draytek VigorSwitch P1085 Скачать руководство пользователя страница 85

Страница: 85 / 267

VigorSwitch P1085 User’s Guide



Enabled - Enable the item function.

Ping of Death

Avoid ping of death attack.
Ping packets that length are larger than 65535 bytes.



Disabled – Disable the item function.



Enabled - Enable the item function.

IPv6 Min Fragments

Check the minimum size of IPv6 fragments, and drop the
packets smaller than the minimum size. The valid range is

from 0 to 65535 bytes, and default value is 1240 bytes.



Disabled – Disable the item function.



Enabled - Enable the item function.

ICMP Fragments

Drop the fragmented ICMP packets.



Disabled – Disable the item function.



Enabled - Enable the item function.

IPv4 Ping Max Size

Determine the IPv4 PING packet with the length.



Disabled – Disable the item function.



Enabled - Enable the item function.-

IPv6 Ping Max Size

Determine the IPv6 PING packet with the length.



Disabled – Disable the item function.



Enabled - Enable the item function.

Ping Max Size Setting

Determine the IPv4/IPv6 PING packet with the length. Specify
the maximum size of the ICMPv4/ICMPv6 ping packets. The

valid range is from 0 to 65535 bytes, and the default value is
512 bytes.

Smurf Attack

Avoid smurf attack. The length range of the netmask is from 0
to 323 bytes, and default length is 0 byte.



Disabled – Disable the item function.



Enabled - Enable the item function.

TCP Min Hdr Size

Check the minimum TCP header and drops the TCP packets

with the header smaller than the minimum size. The length
range is from 0 to 31 bytes, and default length is 20 bytes.



Disabled – Disable the item function.



Enabled - Enable the item function.

TCP-SYN (SPORT<1024)

Drop SYN packets with sport less than 1024.



Disabled – Disable the item function.



Enabled - Enable the item function.

Null Scan Attack

Drop the packets with NULL scan.



Disabled – Disable the item function.



Enabled - Enable the item function.

X-mas Scan Attack

Drop the packets if the sequence number is zero, and the FIN,

URG and PSH bits are set.



Disabled – Disable the item function.



Enabled - Enable the item function.

TCP SYN-FIN Attack

Drop the packets with SYN and FIN bits set.



Disabled – Disable the item function.



Enabled - Enable the item function.-

TCP SYN-RST Attack

Drop the packets with SYN and RST bits set.



Disabled – Disable the item function.

Содержание VigorSwitch P1085












































































































































































































































































Результаты поиска

Содержание VigorSwitch P1085

Отзывы:

Draytek VigorSwitch P1085, Руководство пользователя, Страница: 85 / 267

Результаты поиска

Содержание VigorSwitch P1085

Отзывы: