Draytek VigorSwitch P1085 Скачать руководство пользователя страница 53

Страница: 53 / 267

VigorSwitch P1085 User’s Guide

message is widerly understandable for those clients.

Apply

Apply the settings to the switch.

The IGMP static group is allowed to assign a VLAN/port as a specific IPv4 multicast member.

Every IPv4 multicast stream that belongs to the specified group IP address will be forwarded
to the specified port/VLAN member.

Available settings are explained as follows:

Item Description

VLAN ID

Use the drop down list to specify a VLAN profile as IGMP Static
Group.

Group IP Address

It is an identifier for the group member. Packets sent to such

address will be transferred to all interfaces defined in Member
Ports.
Specify the IPv4 multicast address you wish to assign for the

static group (defined in VLAN ID).

Member Ports

Specify the port(s) that static group with given IPv4 multicast
address shall include.

Apply

Apply the settings to the switch.

Modify

- Click it to modify settings.

Содержание VigorSwitch P1085












































































































































































































































































Результаты поиска

Содержание VigorSwitch P1085

Отзывы:

Draytek VigorSwitch P1085, Руководство пользователя, Страница: 53 / 267

Результаты поиска

Содержание VigorSwitch P1085

Отзывы: