Draytek VigorSwitch P1085, Руководство пользователя, Страница: 36 / 267

VigorSwitch P1085 User’s Guide 28
System Priority The priority is used to determine which switch (local or
remote) on the LAG connection is able to decide LACP
activities. The lower the number is, the higher the priority for
VigorSwitch will be. Therefore, the switch with the highest
system priority (e.g., 1) can make decisions about which ports
actively participate in LAG at a given time.
Apply Apply the settings to the switch.
I
I
I
I
-
-
4
4
-
-
5
5
L
L
A
A
C
C
P
P
P
P
o
o
r
r
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This section provides few detailed configuration regarding to Ports under LACP protocol.
Available settings are explained as follows:
Item Description
Ports Use the drop down list to specify LAN Port.
Priority Enter a port priority number for the port.
Timeout The timeout option decides how local switch of LAG
connection determines connection to be lost. Switch would
also notify the remote switch about this setting value, so that
remote switch can send LACP PDU in correct timing.

Long - LACP PDU will be sent every 30 seconds. If port
member is not seen over 90 seconds, it will cause port
member timeout.
 Short - LACP PDU will be sent per second. If port member
is not seen over 3 seconds, it will cause port member
timeout.
Apply Apply the settings to the switch.
Modify It is used to edit settings (priority and timeout) for LACP port.