Draytek VigorSwitch P1085 Скачать руководство пользователя страница 138

Страница: 138 / 267

VigorSwitch P1085 User’s Guide

130

This page allows a user to configure SNMPv3 user profile.

Available settings are explained as follows:

Item Description

User Name

Enter a name for creating new SNMP user.

Group

Choose one of the SNMP group from the drop down list. Then,

this user profile will be grouped under the selected SNMP
group.

Security Level

Display the security level configured for the selected SNMP

group.

Authentication Method

Method – You can change the methods (None, MD5, SHA) for
the selected SNMPv3 group. If no method is available for you

to select, that means the selected SNMPv3 group is set with No
Security.
Password - Enter a string as the password for authentication.

Privacy Method – You can change the methods (None, DES) for the

selected SNMPv3 group. If no method is available for you to

select, that means the selected SNMPv3 group is set with No
Security.
Password - Enter a string as the password for authentication.

Add

Click it to add a new user profile.

Edit

- click it to modify the settings for the selected profile.

- click it to remove the selected entry.

Содержание VigorSwitch P1085












































































































































































































































































Результаты поиска

Содержание VigorSwitch P1085

Отзывы:

Draytek VigorSwitch P1085, Руководство пользователя, Страница: 138 / 267

Результаты поиска

Содержание VigorSwitch P1085

Отзывы: