Draytek VigorSwitch P1085, Руководство пользователя, Страница: 232 / 267

VigorSwitch P1085 User’s Guide 224
ro - Set the community as read only.
rw - Set the community as read and write.
Related Syntax:
 <config># snmp community <NAME> group <NAME>
 <config># snmp community <NAME> ro
 <config># snmp community <NAME> rw
 <config># snmp community <NAME> view <NAME> ro
 <config># snmp community <NAME> view <NAME> rw
snmp engineid snmp engineid - Set the remote host for SNMP engine.
default - Reset to default setting of engine ID for SNMP server.
<ENGINEID> - Such number must be 10 ~ 64 hexadecimal.
<A.B.C.D> - Enter the IP address of the remote SNMP server.
<HOSTNAME> - Enter the host name of the remote SNMP server.
<X:X::X:X> - Enter the IPv6 address for remote SNMP server.
Related Syntax:

<config># snmp engineid <ENGINEID>

<config># snmp engineid default

<config># snmp engineid remote <A.B.C.D> <ENGINEID>

<config># snmp engineid remote <HOSTNAME> <ENGINEID>

<config># snmp engineid remote <X:X::X:X><ENGINEID>
snmp group snmp group - Set the SNMP group.
<NAME> - Specify the name of SNMP group.
version <1/2c/3> - Specify the version of SNMP service.
<auth/noauth/priv> - Specify the packet authentication mode.
“auth” means to perform packet authentication without
encryption. It is applicable for SNMPv3 only. “noauth” means no
packet authentication performed. “priv” means to perform packet
authentication with encryption and also it is applicable for SNMPv3
only.
read-view <NAME> - Set the view name to enable agent
configuration.
notify-view <NAME> - Set the view name to send only trap included
in SNMP view for notification.
write-view <NAME> - Set the view name to enable viewing.
Related Syntax:

<config># snmp group <NAME> version <1/2c/3>
<auth/noauth/priv> read-view <NAME>

<config># snmp group <NAME> version <1/2c/3>
<auth/noauth/priv> read-view <NAME> notify-view <NAME>
 <config># snmp group <NAME> version <1/2c/3>
<auth/noauth/priv> read-view <NAME> notify-view <NAME>
write-view <NAME>
snmp host snmp host - Set a host to receive SNMP notifications.
<A.B.C.D> - Enter the IPv4/IPv6 address or host name of the
receipt.
version <1/2c/3> - Specify the version of SNMP service.
<NAME> - Set the community name sent with the notification.
udp-port <1-65535> - Set the UDP port number.
timeout <1-300> - Set the timeout of V2c informs.
retries <1-255> - Enter the retry counter of V2c informs.
Related Syntax:
Set a host to receive SNMP notifications.

<config># snmp host <A.B.C.D> <NAME> retries <1-255>