manualshive.com logo in svg

Draytek VigorSwitch P1085, Руководство пользователя, Страница: 77 / 267

Поделиться
Скачать
Draytek VigorSwitch P1085 Скачать руководство пользователя страница 77

 

VigorSwitch P1085 User’s Guide 

69 

 

Time and Date 

Display the time and date information related to the selected 

device. 

  - Click it to modify the time setting for the device. 

Device Action 

Display the action performed by IP-based device. 
Factory Default - Click the Apply button to rest the factory 

default to the IP device. 
Reboot - Click the Apply button to reboot the IP device 

immediately. 

Device Ping Check -- Configure settings for ping check of IP camera or NVR. 

Port 

Display the port number of the IP device   

Enable Enable 

- 

Click it to enable the device ping check function. 

Disable - Click it to disable the function. 

Ping IP Address 

Add Device - Click it to add an IP address of the device to be 

pinged by VigorSwitch. Up to 16 IP address(es) can be    added 
and displayed in this field one by one (with the format of 
x.x.x.x, x.x.x.x, x.x.x.x...) 
Del Device - Click it to remove the selected IP address. 

Interval Time (sec) 

Set a time interval (15, 30, 60, 120) for pinging action. 

Retry Time 

Choose 1, 3, or 5 for Vigor system to retry the pinging action. 

Failure Action 

Configure the power behavior for each LAN port. 
Power Cycle - Once the device is offline, Vigorswitch will 

power off the device and then power on the device again.   
Power Off - When the device is offline, power off the device 

immediately. 
Nothing - When the device is offline, no action will be   

 

Note: When a PoE hub connecting to LAN port of VigorSwitch, 

the power behavior (on/off) to the PoE hub also will apply to 
all the devices connecting to the PoE hub. 

Mail Alert 

Enable - When the device is offline, Vigor system will send an 

alert mail to notify the receiptant.   

 

Mail with Snapshot - If enabled, the switch will try to get 

snapshot from the device per half hour. Before using this 

Содержание VigorSwitch P1085












































































































































































































































































Отзывы:

Нет отзывов