manualshive.com logo in svg

Draytek VigorSwitch P1085, Руководство пользователя, Страница: 39 / 267

Поделиться
Скачать
Draytek VigorSwitch P1085 Скачать руководство пользователя страница 39

 

VigorSwitch P1085 User’s Guide 

31 

 

Trunk - An untagged member of one VLAN at most, and is 
a tagged member of zero or more VLANs.

 

PVID 

A PVID (Port VLAN ID) is a tag that adds to incoming untagged 
frames received on a port so that the frames are forwarded to 

the VLAN group that the tag defines. 
For port under Access Mode, VLAN ID provided as PVID would 

automatically be selected as the untagged VLAN. 

Accepted Type 

Specify the acceptable-frame-type of the specified interfaces. 
It’s only available with Hybrid mode. 

 

All - Accept frames regardless it's tagged with 802.1q or 
not. 

 

Tag Only - Accept frames only with 802.1q tagged. 

 

Untag Only - Accept frames untagged. 

Ingress Filtering 

Enable the ingress filtering to filter out any packets not belong 

to any VLAN members of this port. It is enabled automatically 
while operating in Access and Trunk mode. 

 

Enabled – Click it to enable the function. 

 

Disabled - Click it to disable the function. 

Tagged VLAN 

Specify the VLAN profile tagged in the VLAN. 

Untagged VLAN 

Specify the VLAN profile untagged in the VLAN. 

Forbidden VLAN 

Specify the VLAN profile forbidden in the VLAN. 

Apply 

Apply the settings to the switch. 

Modify 

  - It is used to edit settings for the selected port. 

 

Содержание VigorSwitch P1085












































































































































































































































































Отзывы:

Нет отзывов