Draytek VigorSwitch P1085, Руководство пользователя, Страница: 34 / 267

VigorSwitch P1085 User’s Guide 26
for best reliability.
I
I
I
I
-
-
4
4
-
-
3
3
L
L
A
A
G
G
P
P
o
o
r
r
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This page defines port setting for each LAG profile (LAG1 to LAG8), including data speed and
enabling/disabling the flow control.
Available settings are explained as follows:
Item Description
LAG Use the drop down list to selelct one or more LAG profiles.
Enable  Enable –Click it to enable the profile.
 Disable – Click it to disable the profile.
Speed Port speed capabilities:

Auto(10M/100M/1000M): Auto speed with all
capabilities.
 Auto(10M): Auto speed with 10M ability only.
 Auto(100M): Auto speed with 100M ability only.

Auto(1000M): Auto speed with 1000M ability only.

Auto(10/100M): Auto speed with 10/100M ability.

10M: Force speed with 10M ability.

100M: Force speed with 100M ability.

1000M: Force speed with 1000M ability.
Selecting Auto (auto-negotiation) allows one port to negotiate
with a peer port automatically to obtain the connection speed
and duplex mode that both ends support. When
auto-negotiation is turned on, a port on the switch negotiates
with the peer automatically to determine the connection
speed and duplex mode. If the peer port does not support
auto-negotiation or turns off this feature, the switch
determines the connection speed by detecting the signal on
the cable and using half duplex mode. When the switch’s
auto-negotiation is turned off, a port uses the pre-configured
speed and duplex mode when making a connection, thus
requiring you to make sure that the settings of the peer port