Draytek VigorSwitch P1085, Руководство пользователя, Страница: 125 / 267

VigorSwitch P1085 User’s Guide 117
Interval Time - Set the interval time for the switch to send
notification to CPE.
STUN Settings STUN Settings - Click Enable to configure STUN settings.
Server Address - Enter the IP address of the STUN server.
Server Port - Enter the port number of the STUN server.
Minimum Keep Alive Period - If STUN is enabled, the switch
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the minimum period. The default setting is “60 seconds”.
Maximum Keep Alive Period - If STUN is enabled, the switch
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the maximum period. A value of “-1” indicates that no
maximum period is specified.
Health Check Vigor system will check the health status of LAN ports
including link up /down, speed change or PoE power
disconnection.
Port Link Up/Down - Select LAN port(s) to do the health check
of port link.
Link Speed Change - Select LAN port(s) to do the health check
of speed change.
PoE Port Warning - Select LAN port(s) to do the health check
of PoE power.
Apply Apply the settings to the switch.
Clear Discard current settings.